Update queue - ZeroMQ

The Genesis low-code platform uses ZeroMQ out of the box to provide a zero-configuration decentralised peer-to-peer update queue.

It works because the GENESIS_CLUSTER process knows (via clustering) all the nodes within the cluster - so it can broadcast and consume appropriately.

• ZeroMQ is best suited for fixed-sized deployments.
• MQTT is recommended for set-ups that require dynamic scaling.

Proxy mode

All processes have a ZeroMQ port, which is their process port + 10000. Additionally, GENESIS_CLUSTER has two additional ports (ZeroMQProxyInboundPort and ZeroMQProxyOutboundPort) to act as proxy ports. This is necessary so that:

• scripts can publish to ZeroMQ without having an allocated port
• it can run in ZeroMQ “proxy” mode

The platform can be configured to run with or without proxy mode, and this setting applies to all processes.

When running under non-proxy mode, each process binds to its ZeroMQ port and all other processes need to connect to that port to receive updates. This mode isn't recommended for large apps, as 10 microservices will have 10 publishers - which will give us 100 connections.

When in non-proxy mode, all processes need to connect to the GENESIS_CLUSTER proxy ports, as scripts or other non-genesis processes could be publishing updates through those.

When running under proxy mode, each process connects to the ZeroMQProxyInboundPort to publish data and subscribes to the ZeroMQProxyOutboundPort to receive data, therefore reducing the total number of connections.

ZeroMQ configuration options

ZeroMQ is the default MQ system in Genesis, but it can be set explicitly with the following config:

genesis-system-definition.kts

systemDefinition {
    global {
        ...
        item(name = "MqLayer", value = "ZeroMQ")
        ...
    }
}

Other config values that are available are listed below:

Config Item	Description	Default
ZeroMQProxyInboundPort (required)	The port used for ZeroMQ inbound connections	-
ZeroMQProxyOutboundPort (required)	The port used for ZeroMQ outbound connections	-
ZeroMQProxyModeEnabled	Enable proxy mode (recommended for large apps)	false
ZeroMQProxyUnicastRelayEnabled	Creates a point-to-point connection between GENESIS_CLUSTER processes for all the nodes in the cluster. This connection is used to send local update queue events to the remote nodes in the cluster in order to ensure every node has access to all the updates	false

important

If you are using a cloud environment that does not allow multicast traffic (e.g. AWS), then ZeroMQProxyModeEnabled and ZeroMQProxyUnicastRelayEnabled need to be set to true