Version: Previous

Genesis Foundation UI App Layout

API Docs

Declarative HTML API

The following example shows the usage of the declarative API with zero-charts and the output that it produces.

<foundation-layout ${ref('analyticsLayout')}>
  <foundation-layout-region type="horizontal">
    <foundation-layout-item title="Static Data Bar" registration="bar" closable>
      <foundation-g2plot-chart
        type="bar"
        :config=${(x) => x.barConfig}
        :data=${(x) => x.barData}
      ></foundation-g2plot-chart>
    </foundation-layout-item>
    <foundation-layout-region type="vertical">
      <foundation-layout-item title="Static Data Stock" registration="stock" closable>
        <foundation-g2plot-chart
          type="stock"
          :config=${(x) => x.stockConfiguration}
          :data=${(x) => x.stockData}
        ></foundation-g2plot-chart>
      </foundation-layout-item>
      <foundation-layout-item title="Static Data Rose" registration="rose" closable>
        <foundation-g2plot-chart
          type="rose"
          :config=${(x) => x.roseConfig}
          :data=${(x) => x.roseData}
          :legendParser=${(x) => x.roseLegendParser()}
        ></foundation-g2plot-chart>
      </foundation-layout-item>
    </foundation-layout-region>
  </foundation-layout-region>
</foundation-layout>

Example output of the declarative API with the zero charts

Set-up

Basic install

To enable this module in your application, follow the steps below.

Add @genesislcap/foundation-layout as a dependency in your package.json file. Whenever you change the dependencies of your project, ensure you run the $ npm run bootstrap command again. You can find more information in the package.json basics page.

{
  ...
  "dependencies": {
    "@genesislcap/foundation-layout": "latest"
  },
  ...
}

Register the layout with the design system. This is probably in a file called components.ts, located where you call .register() on the design system.

FoundationDesignSystem: registerFoundationDesignSystem().register(
	// ...Other registrations
	// add foundationLayoutComponents here
	foundationLayoutComponents,
)

This registers the three custom elements for use in your application. The components will use the prefix of the design system as their prefix. For example, the root component will be <foundation-layout> in the Foundation design system, and <zero-layout> in the Zero (alpha) design system.

info

For the rest of this document, the components will be referred to with the foundation- prefix.

Custom styling

The required class, template, and base styles are exported as part of the package, allowing a client to customise the styling of the layout system via design system extensions.

tip

All the customisable styles of the layout system are contained within the styles for <foundation-layout>. So if you want to customise the styles in addition to setting the css variables, you only need to set the styles here.

Top Level Component `<foundation-layout>`

Top level web component, which is used to initialise a custom layout

reload-buffer : numerical attribute that controls the buffer between how long the layout is reloaded. The default is 500ms. In this case, the layout is only reloaded if the child elements of the layout region are manipulated once every 500ms. This is to stop the layout being reloaded over and over for every single item during initialisation. The higher the value is, the more performant the component is, but the first load will appear to take longer.
auto-save-key : optional string which if set, will enable autosaving the layout under this key in local storage. See here for more.

tip

This only applies for usage with the declarative HTML API. When the layout first loads after this amount of time, it emits an event.

Layout Regions

If you don't specify the type of the layout region, it defaults to type="horizontal";

type: vertical, horizontal, tabs (default horizontal).
size: optional string parameter defining size, see here.

`<foundation-layout-region type="vertical">`

Indicates to the layout system that all immediate children are (by default) to be split equally within the available space of this component using n-1 column split(s). Can be nested within other horizontal and vertical regions.

`<foundation-layout-region type="horizontal">`

Indicates to the layout system that all immediate children are (by default) to be split equally among the available space of this component using n-1 row split(s). Can be nested within other horizontal and vertical regions.

`<foundation-layout-region type="tabs">`

Indicates to the layout system that all immediate children are to be added as tabs in the available space of this component, with a tab for each child. The tabs are ordered according to which child the layout item is (e.g. the second <foundation-layout-item> of the tab split is the second tab). The first child will be the one that is open by default. Can be nested within horizontal and vertical regions, but cannot have more layout sections inside it.

Layout Item `<foundation-layout-item>`

Wrapper component that lives inside a layout section and wraps the client content. All content must be inside a layout item; otherwise, a runtime error will be thrown when the layout attempts to render itself on screen.

title: string defining the title of the pane that contains the content. Defaults to Item x, where x is the pane number.
closable: boolean defining whether this element is closable - Default false.
size: optional string parameter defining size, see here.
registration: optional string, which manually sets the registered name for the pane - see here. By default, each item that doesn't have the registration attribute set will be a string registered sequentially starting at "1".

Sizing

The layout sections and layout item all have an optional attribute:

size: string defining the size. For rows, it specifies height. For columns, it specifies width. Has format <number><size-unit>. Currently only supports units fr and %. Space is first proportionally allocated to items with sizeUnit %. If there is any space left over (less than 100% allocated), then the remainder is allocated to the items with unit fr according to the fractional size. If more than 100% is allocated, then an extra 50% is allocated to items with unit fr and is allocated to each item according to its fractional size. All item sizes are then adjusted to bring the total back to 100%.

info

The size defines the size of the component compared to the siblings within the context of the component's parent.

JavaScript API

The JavaScript API is accessed through the methods on the root layout object and allows for saving/loading the layout state, and dynamically adding items to the layout at runtime.

Dynamic registration and adding items

To have a pane displayed on the layout system, it must be registered with the layout system. When using the declarative API, the layout system takes care of this for you, but as you start to add items dynamically and then serialise the layout, you need to consider which panes are registered. See this contained example, which allows the user to add pre-determined items to the layout dynamically.

tip

If you are only using the declarative API, and not using any dynamic integrations with JavaScript, then you shouldn't need to set the registration names of any items, as all the same items will be registered when you load a previously saved layout. If you are dynamically adding items as well, it is highly recommended to set the registration names of items manually. This makes it easier to figure out what is and is not registered.

When using the declarative API, use the registration attribute on the <foundation-layout-item> component.
When using the JavaScript API, set the registration optional parameter on the registered element config.

Register Item

This API enables you to register an item at runtime, but it will not be displayed in the layout. This could be used to register components in anticipation of displaying them when loading a serialised layout - see this example.

Add Item

Add an item or items that have previously been registered with the layout.

Remove Items

Dynamically remove items from the layout. See the API documentation (link above) for side effects and options.

Layout Required Registrations

Static function to read a layout config. It returns a list of all the required registrations required to load it in the layout system. See this example.

Get Current Registrations

Returns a list of all the items currently registered with the layout system.

tip

Use this function over .layoutRequiredRegistrations(layout: SerialisedLayout) to get the current registrations, because that will miss any items that are currently registered with the layout system, but which are not shown on the layout.

Serialising layout

The JavaScript API can be used to save and load layout states manually. This only describes the state of the dynamic layout itself. It is the responsibility of each component within the layout to serialise its own state, if required. To enable autosaving the layout, see here.

Get Layout

Get an object describing the current layout so that it can be restored at a later date. This does not save any data internally to the layout. It is up to the client to store this state where appropriate for later recall (browser local storage, persistence layer, etc.). Use the autosaving layout feature to get the layout to do this for you with local storage.

You can store state for an instance of an item, and that will be saved inline. See managing state.

Load Layout

Loads a serialised layout. All items that are described in the config to load must already be registered with the layout system, using either the declarative or JavaScript API. If there are items missing (could be due either to missing items or to a mismatch of registered names) then a LayoutUsageError will be thrown containing the names of the missing items. Alternatively, you can request placeholder items to be added.

Events

Emitted Events

Certain actions that are performed by the user interacting with the layout emit events. See the API document (in the link above) for the events and when they're emitted. Interacting with these events allows your client code to interact dynamically with the layout, such as enabling/disabling buttons to add items to the layout when they're removed/added.

Received Events

Certain events are listened to by the container for each component, enabling the component to interact with the layout. For example, a component could emit an event to change the title of the containing window:

this.$emit(eventType, eventDetail)

Each event requires a certain detail to process the event - see the map of events to their required details.

Customising header buttons

You can add custom buttons on layout items, and then control their behaviour. See the custom button API for the full definition. Setting this is optional. If you do define it, you must define it as an array, which enables you to add multiple custom buttons.

The svg parameter controls the icon that is displayed for your button. The format must be a base64 image definition. See the format (as explained in the linked api document above), and then replace the text around the << >> part with a base64 encoded definition of the svg you wish to use.
The onClick parameter will register a callback with the button. When the user clicks the button, your callback will be called. The callback receives a reference to the clicked button element, and to the element that is contained in the layout item associated with the clicked button.

Different layout instances can have their own custom buttons, or they can share definitions. You are not able to have fine-grained control over each layout item, though; so if a layout has a custom button, then every item that it contains will have the button.

Applying the custom button

To ensure that every item gets the button as expected, you need to ensure that you apply the custom button definitions as early as possible. If you are using the html API then you'll probably want to apply the definitions in the template.

<foundation-layout :customButtons=${() => buttonDefinition}>
  ...
</foundation-layout>

If you are only using the javascript API then you should just apply the property as soon as you can.

layout.customButtons = buttonDefinition;

Renaming example

See this example of creating a custom button, which enables the user to rename an item.

Autosaving layout

You can set the layout to autosave in local storage as the user interacts with it. To do this, set the auto-save-key attribute to a unique string on the root element; the layout will be saved in this key. The layout will be saved for later recall in local storage whenever the user performs the following actions:

adding an item
removing an item
resizing items using the divider
dragging items around the layout

When you have enabled autosave, you are still able to use the manual serialising commands.

Reloading the layout

The function tryLoadLayoutFromLocalStorage() is used to rehydrate the layout from local storage, when auto-save-key is enabled. If you are using the declarative API, then this function is called for you automatically.

If you are manually registering items (too) using the JavaScript API, you must call this function manually immediately after you have finished registering all the items.

Layout placeholder

If the layout is auto-loaded with items that are missing from the registration, then a placeholder item is displayed instead. Additionally, the close option is added to the pane. This accounts for you removing an item from a layout that a user has autosaved in their config.

You can change the text of the placeholder using the observable binding :missingItemPlaceholder. This is a function that takes a string (the missing registration name) and returns the string to use as the placeholder. A default is set, but you can override it. See the override implementation in this example.

Invalidating the cache

As explained in the previous section, a placeholder item is added if an item is no longer registered for the auto-loaded layout. This accounts for removing an item. However, there is the reverse issue if you are only using the declarative API; if you add a new item and the user already has an autosaved layout, then that will be loaded - which effectively hides the new item you've added.

In this case, you must invalidate the autosaved layout cache. The cleanest and easiest implementation is to add a hash onto the end of your auto-save-key, which will start a new autosave for this table (and reload the default, containing your new layout item).

Contained elements

This section concerns the behaviour of elements inside the layout. If you are using simple elements or Genesis-supplied elements, this is less of a concern; but if you are building complex custom components yourself, you need this information.

Element lifecycle (gating)

Some actions that the user can perform with items in the layout will run the component lifecycle functions (connectedCallback and disconnectedCallback) when you don't want them to run:

when an item is dragged around the layout
potentially, when another item is removed from the layout
potentially, when new items are added to the layout
when an item is maximised or minimised

For example, if you have a component with a loaded resource on the layout (such as a grid with a grid-pro-genesis-datasource) and you add a new item to the layout with the JavaScript API, then the component with the loaded resource will have to reload too. It is important that any such element accounts for this, including such requirements as caching data, or resizing correctly.

In the @genesislcap/foundation-utils package, there is a mix-in class LifecycleMixin which exposes two protected members:

shouldRunConnect
shouldRunDisconnect

These can be used to gate specific functionality.

For example, if there are parts of disconnectedCallback that you don't want to run when the item is being dragged around the layout, you can gate it behind a (!this.shouldRunDisconnect) return; early return. See this example and this example.

warning

At the very least, you must run super calls to the lifecycle methods, or else your custom element will not work correctly.

Resource-intensive components

You do not need to de-register a component that is registered in the layout while it is not in use. However, if you have a component that is extremely resource-intensive, then you can use this lifecycle control method to ensure that it only consumes resources when it is in use.

When the element is part of the layout registry, then shouldRunConnect will be false and you can use this to ensure that your component isn't doing unnecessary work while part of the cache.
Once the component is actually initialised in the layout on the DOM, then shouldRunConnect will be true, and you can then perform all the required initialisation.

Managing the state

Items inside the layout can save and restore the state using various methods, but it can become difficult to manage the state if you're adding the same item to the layout multiple times (multiple instances of the same web component).

You can implement the LayoutComponentWithState interface, which enables you to save and load the state per instance of your components. See the linked interface and the associated functions API documentation for examples and explanations of usage.

Usage of this interface is optional; if you do not need to manage the state for your components in this way, then simply do not implement the interface.

warning

The layout system only interacts with the immediately contained items - so if you have components that contain other components, each top-level component must interact with the contained components to manage their states.

danger

Each layout item can contain multiple components, and most of the time there are no extra considerations when doing this. However, the state of each component in an instance is saved in order of the components on the DOM, so if the serialised state is manually changed to have the items out of order with their state, then the incorrect states will be passed into each item. This should not occur during defined behaviour, but is possible if the end-user is able to change the state passed into loadLayout() manually.

Element cloning

To enable you to add multiple items from the same registration, the layout system clones elements to add to the layout. This is the case both when items are added with .addItem(), and when they are added using the declarative API. Under the hood, this uses the Node cloneNode api. There are certain limitations to this function, especially when using custom elements with the shadow DOM. See troubleshooting example.

If you are writing your own custom element that needs to work inside the layout, follow these steps.

In the @genesislcap/foundation-utils package, there is a mix-in class LifecycleMixin, which overrides the cloneNode API.

// Make a call to `deepClone` and manually clone children
override cloneNode(deep?: boolean): Node {
	const thisClone = this.deepClone();
	if (deep) {
		Array.from(this.childNodes).forEach((child) => {
			thisClone.appendChild(child.cloneNode(true));
		});
	}
	return thisClone;
}

// Create a new element of the same name and copy over attributes
deepClone(): Node {
	const copy = document.createElement(this.tagName.toLowerCase());
	this.getAttributeNames().forEach((at) => copy.setAttribute(at, this.getAttribute(at)));
	return copy;
}

You can then extend the cloning functionality for your specific requirements. For example, our charts component needs to copy over config and data parameters.

export class G2PlotChart extends LifecycleMixin(FoundationElement) {
	...
  override deepClone(): Node {
    const copy = super.deepClone() as G2PlotChart;
    copy.config = structuredClone(this.config);
    copy.data = structuredClone(this.data);
    return copy;
  }
	...
}

Some items you'll probably want to copy over are eventListeners and other non-attribute configuration elements on your custom element.

Examples

Simple example

Simple example with a vertical split and two items that will take up equal space.

<foundation-layout>
  <foundation-layout-region type="horizontal">
    <foundation-layout-item title="Component 1">
      <!-- Content -->
    </foundation-layout-item>
    <foundation-layout-item title="Component 2">
      <!-- Content -->
    </foundation-layout-item>
  </foundation-layout-region>
</foundation-layout>

Will be rendered as:

+-----------------------------------------------------+
|                                                     |
|              Component 1 Contents                   |
|                                                     |
+-----------------------------------------------------+
|                                                     |
|              Component 2 Contents                   |
|                                                     |
+-----------------------------------------------------+

Nested example

A slightly more complicated example:

<foundation-layout>
  <foundation-layout-region type="vertical">
    <foundation-layout-item title="Component 1" size="25%" closable>
      <!-- Content -->
    </foundation-layout-item>

    <foundation-layout-region type="horizontal">
      <foundation-layout-item title="Component 2">
        <!-- Content -->
      </foundation-layout-item>
      <foundation-layout-item title="Component 3">
        <!-- Content -->
      </foundation-layout-item>
    </foundation-layout-region>
  </foundation-layout-region>

</foundation-layout>

Would render the following:

+-------------+---------------------------------------+
|             |                                       |
|             |        Component 2 Contents           |
|  Component  |                                       |
|      1      +---------------------------------------+
|  Contents   |                                       |
|             |        Component 3 Contents           |
|             |                                       |
+-------------+---------------------------------------+

Component 1 has a Close button. By default, Component 1 would be 50% width and 2 and 3 would take up the other 50% width, but here we set 25% as the width of Component 1 layout item (width because it is the size in the context of a vertical split).

Multi-nested example

If instead we had:

<foundation-layout>
  <foundation-layout-region type="vertical">
    <foundation-layout-item title="Component 1" size="25%" closable>
      <!-- Content -->
    </foundation-layout-item>

    <foundation-layout-region type="horizontal">
      <foundation-layout-region type="vertical">
        <foundation-layout-item title="Component 2">
          <!-- Content -->
        </foundation-layout-item>
        <foundation-layout-item title="Component 3">
          <!-- Content -->
        </foundation-layout-item>
        <foundation-layout-item title="Component 4">
          <!-- Content -->
        </foundation-layout-item>
      </foundation-layout-region>

      <foundation-layout-region type="tabs">
        <foundation-layout-item title="Component 5">
          <!-- Content -->
        </foundation-layout-item>
        <foundation-layout-item title="Component 6">
          <!-- Content -->
        </foundation-layout-item>
      </foundation-layout-region>
    </foundation-layout-region>
  </foundation-layout-region>

</foundation-layout>

This would render the following:

+-------------+------------+-------------+------------+
|             |            |             |            |
|             |   Comp 2   |    Comp 3   |   Comp 4   |
|  Component  |            |             |            |
|      1      +------------+-------------+------------+
|  Contents   |_5_|_6_|                               |
|             |        Component 5 Contents           |
|             |                                       |
+-------------+---------------------------------------+

Component 1 has a Close button. Component 1 takes up 25% of the initial width. Components 2,3,4 take up a third of the remaining width between them (default behaviour) and 5 and 6 are tabbed.

`repeat` directive

You can use template directives such as repeat:

interface Position {
	symbol: string;
}

class Commodities extends GenesisElement {
	positions: Position[] // Not @observable - see following section

	...
}

const template = html<Commodities>`
<foundation-layout>
	<foundation-layout-region type="horizontal">
		${when(x => x.positions, html<Position>`
			<foundation-layout-item title="${x => x.symbol}">
				<chart symbol="${x => x.symbol}"></chart>
			</foundation-layout-item>`)}
	</foundation-layout-region>
</foundation-layout>`;

For an example where the Commodities object has three positions, you will see the following output:

+-----------------------------------------------------+
|              Component 1 Contents                   |
+-----------------------------------------------------+
|              Component 2 Contents                   |
+-----------------------------------------------------+
|              Component 3 Contents                   |
+-----------------------------------------------------+

note

<chart> is just an example component; it doesn't exist within foundation-ui.

`when` directive

Using the when directive:

@customElement({
	name: 'my-element',
	template,
})
class Analytics extends GenesisElement {
	showIndexFunds = true; // not @observable
}

var template = html<Analytics>`
	<button class="toggle">Toggle Index</button>
	<foundation-layout>
		<foundation-layout-region>
			<foundation-layout-item>
				<chart type="stocks"></chart>
			</foundation-layout-item>

			${when(x => x.showIndexFunds, html`
				<foundation-layout-item>
					<chart type="index-funds"></chart>
				</foundation-layout-item>
			`)}

		</foundation-layout-region>
	</foundation-layout>
`;

You would see both items rendered like this:

+---------------------------------------------+
|              Stocks Chart                   |
+---------------------------------------------+
|              Index  Chart                   |
+---------------------------------------------+

If you had showIndexFunds = false; then only the Stocks Chart would be rendered.

danger

Directives are for initialising the layout only and should not be used with changing @observable attributes, which would cause the layout to reinitialise incorrectly - this will duplicate the panels. For example, you can use the when directive to conditionally render a pane during initialisation, but not to toggle whether to show/hide the pane afterwards. See this example.

Multiple instances

Consider the following example:

<div class="container" style="display: grid; grid-template-columns: 1fr; grid-auto-rows: minmax(46vh, auto)">
	<div style="display: block; position: relative;">
		<foundation-layout>
			<foundation-layout-region>
				<foundation-layout-item><h1>Item 1</h1></foundation-layout-item>
				<foundation-layout-item><h1>Item 2</h1></foundation-layout-item>
			</foundation-layout-region>
		</foundation-layout>
	</div>
	<div style="display: block; position: relative;">
		<foundation-layout>
			<foundation-layout-region type="vertical">
				<foundation-layout-item><h1>Item 3</h1></foundation-layout-item>
				<foundation-layout-item><h1>Item 4</h1></foundation-layout-item>
			</foundation-layout-region>
		</foundation-layout>
	</div>
</div>

This describes the following layout:

+---------------------------------------------+
|                   Item 1                    |
+---------------------------------------------+
|                   Item 2                    |
+---------------------------------------------+

+----------------------+----------------------+
|                      |                      |
|       Item 3         |        Item 4        |
|                      |                      |
+----------------------+----------------------+

Here a grid region has been used to style two completely separate instances of the dynamic layout. Even though we have named each <h1> sequentially, the two layouts are completely separate and the default titles of each tab (Item 1 and Item 2 for both layouts), will reflect this. You can configure each layout separately, and you cannot drag layout items from one layout into the other one.

info

This is just an example; you could have more than two layouts on a page or style them with a different method to the grid.

Adding items dynamically

This is an example of using the JavaScript API to add items to the layout at runtime. Before reading this example, you should familiarise yourself with the API Section.

Say you want the user to be able to choose between three different types of item that can be put onto the layout - a profile-management table, a pie chart, and a column chart.

// Can either create an element and initialise it completely using JavaScript
const profileManagement = document.createElement('profile-management');
// Or could grab a reference to one you create via markup
const pieChart = document.getElementById('pie-chart');
// We can have a reference using `ref` directive
// const colChart = this.columnChart;

We can then register these elements with the layout system. Registering it with the layout system removes it from its original location.

// Using a duplicate registration name is a runtime error
this.layout.registerItem('profile', [profileManagement]);
this.layout.registerItem('pie', [pieChart]);
this.layout.registerItem('colChart', [this.columnChart]);

Finally, use the addItem API to add a pane onto the layout using a previously registered item.

this.layout.addItem({
	registration: 'profile',
	name: 'Profile Management',
	closable: true,
})

Using addItem with a registration that has not been set is a runtime error. Remember addItem has an optional second parameter for setting the placement of the new pane.

tip

Items registered using the declarative API use the same pool of registration names, so you can also use addItem to add them to the layout too.

Contained example

This is a complete example of the above, omitting imports.

// template
export const template = html<ContainedExample>`
  <div style="display: grid; grid-template-columns: 1fr; grid-auto-rows: minmax(7vh, auto)">
    <div style="display: block; position: relative;">
      <foundation-button @click=${(x) => x.addItem('1')}>Test 1</foundation-button>
      <foundation-button @click=${(x) => x.addItem('2')}>Test 2</foundation-button>
      <foundation-button @click=${(x) => x.addItem('3')}>Test 3</foundation-button>
    </div>
    <div style="display: block; position: relative; grid-row-start: 2; grid-row-end: 12;">
      <foundation-layout
        auto-save-key="layout-preview-contained-example"
        :missingItemPlaceholder=${(x) => x.missingItemOverride()}
        ${ref('containedExampleLayout')}
      ></foundation-layout>
    </div>
  </div>
`;

// class
@customElement({
  name: 'contained-example',
  template,
})
export class ContainedExample extends GenesisElement {
  containedExampleLayout: FoundationLayout;
  private _addedPaneCount = 0;

  connectedCallback(): void {
    super.connectedCallback();

    const h1 = document.createElement('h1');
    h1.innerHTML = 'Example 1';
    const p1 = document.createElement('p');
    p1.innerHTML = 'Ex 1';

    const h2 = document.createElement('h2');
    h2.innerHTML = 'Example 2';
    const p2 = document.createElement('p');
    p2.innerHTML = 'Ex 2';

    const h3 = document.createElement('h3');
    h3.innerHTML = 'Example 3';
    const p3 = document.createElement('p');
    p3.innerHTML = 'Ex 3';

    this.containedExampleLayout.registerItem('1', [h1, p1]);
    this.containedExampleLayout.registerItem('2', [h2, p2]);
    this.containedExampleLayout.registerItem('3', [h3, p3]);
    this.containedExampleLayout.tryLoadLayoutFromLocalStorage();
  }

  addItem(registration: string) {
    this.containedExampleLayout.addItem({
      registration,
      title: `${registration} (${(this._addedPaneCount += 1)})`,
      closable: true,
    });
  }

  missingItemOverride = () => (missingItem: string) => `Missing Item: ${missingItem}`;
}

Loading serialised layouts

This is an elaborate example of using the JavaScript API with consideration of the registered names. Before reading this example, you should familiarise yourself with the API Section:

<foundation-layout>
  <foundation-layout-region type="horizontal">
    <foundation-layout-item title="Trades" registration="trades">
      <!-- Content -->
    </foundation-layout-item>
    <foundation-layout-item title="Users" registration="users">
      <!-- Content -->
    </foundation-layout-item>
  </foundation-layout-region>
</foundation-layout>

We can use layoutRequiredRegistrations() on the config returned from getLayout() to see the registered names that are required to load the layout.

const layout = document.querySelector('foundation-layout'); // as FoundatonLayout in TypeScript;
const layoutConfig = layout.getLayout();
console.log(FoundatonLayout.layoutRequiredRegistrations(layoutConfig))

This will log ['trades','users'] because these are the two registered panes. You can then load any layout that only contains either/both of these items.

Consider the situation where we dynamically add an item to the right-hand side of the layout.

const newItem = document.createElement('p'); //simple example
newItem.innerText = 'Test';

layout.registerItem(test, [newItem]);
const layoutConfigTwo = layout.getLayout()
console.log(FoundationLayout.layoutRequiredRegistrations(layoutConfigTwo));

Now we get [ "test", "trades", "users"] as the output, because to load layoutConfigTwo we now need all three of those registered panes.

Consider now where the user refreshes the page to go back to the original state of the layout with just the two elements added, but then tries to load:

layoutConfigTwo:

// User has refreshed page

console.log(layout.registeredItems());
// Ouputs ['trades','users']

layout.loadLayout(layoutConfigTwo);
// Uncaught Error: Trying to load layout with extra components. The component(s) not currently loaded are "test"

Notice the error message says that the test component is missing. This is because it was required as part of the layout when we used getLayout(), but it hasn't been added as part of the layout now. If we added the item using registerItem() we could subsequently run layout.loadLayout(layoutConfigTwo); to load the layout successfully.

warning

Just because an item is not displayed on the layout does not mean it is not registered. .getLayout() gets only the current layout config, so you cannot use it to see every single item that is currently registered (unless every item is added). This is why you should use .registeredItems() to get the currently registered items.

Proactively registering items

Here is a simple approach to ensure that all items are registered when you load a layout; loop through all the items that you could possibly load and register them.

const allItems = [
	{registration: 'trades', elements: [...], },
	{registration: 'users', elements: [...], },
	{registration: 'profiles', elements: [...], },
	{registration: 'notifications', elements: [...], },
];

allItems.forEach(({registration, elements}) => {
	layout.registerItem(registration, elements);
})

Now all those items will be registered with the layout for potential use when calling loadLayout(), or added using addItem().

Reactively registering items

Alternatively, you could query the current layout and the layout you want to load to see if there are any missing registered items; you can then register the missing ones. Using our previous examples:

const currentRegistrations = FoundatonLayout.registeredItems();
// ['trades','users']
const requiredRegistrations = FoundatonLayout.layoutRequiredRegistrations(layoutConfigTwo);
// ['test','trades','users']

// We can see 'test' is missing and therefore we should register it
layout.registerItem(test, [element]);

info

Only items missing from the requiredRegistrations are an issue. If there are items in the currentRegistrations that are not in requiredRegistrations, this is not an issue - because these will simply be unused registrations.

warning

If you are calling registerItem manually and are using the autosave feature, see here.

Custom item renaming header button

Here is an example of creating a custom button for the layout. When the button is clicked, it prompts the user for a name, and will rename the item in the layout.

export const layoutCustomButtons: CustomButton[] = [
  {
    svg: LAYOUT_ICONS.renameSVG,
    onClick: (button: HTMLElement, elem: HTMLElement) => {
      const title = prompt('New name?');
      const event: LayoutReceiveEventsDetail['changeTitle'] = {
        title,
        mode: 'replace',
      };
      elem.dispatchEvent(
        new CustomEvent(LayoutReceiveEvents.changeTitle, { detail: event, bubbles: true }),
      );
    },
  },
];

You can import LAYOUT_ICONS, CustomButton, LayoutReceiveEvents, and LayoutReceiveEventsDetail from the foundation-layout package, to get strong typing.

warning

You'll probably want to improve this callback function to handle cases where the user doesn't enter a prompt value.

Incorrect examples

The following section contains examples of incorrect usage, which are useful for troubleshooting.

Non-layout child

The following example is invalid:

<foundation-layout>
  <foundation-layout-region type="horizontal">
    <h1>My splits</h1>
    <foundation-layout-item title="Component 1">
      <!-- Content -->
    </foundation-layout-item>
    <foundation-layout-item title="Component 2">
      <!-- Content -->
    </foundation-layout-item>
  </foundation-layout-region>
</foundation-layout>

This is because there is a child of one of the layout regions which isn't another layout region or layout item (the <h1>). This will throw a runtime error.

Layout region in tabs

The following example is invalid:

<foundation-layout>
	<foundation-layout-region type="tabs">

		<foundation-layout-region type="vertical">
			<foundation-layout-item title="Component 1">
				<!-- Content -->
			</foundation-layout-item>
			<foundation-layout-item title="Component 2">
				<!-- Content -->
			</foundation-layout-item>
		</foundation-layout-region>

		<foundation-layout-item title="Component 3">
			<!-- Content -->
		</foundation-layout-item>

	</foundation-layout-region>
</foundation-layout>

This is because you cannot have more layout regions nested inside a tab region. You will get undefined behaviour.

Multiple items in root

The following example is invalid:

<foundation-layout>
		<foundation-layout-item title="Component 1">
			<!-- Content -->
		</foundation-layout-item>
		<foundation-layout-item title="Component 2">
			<!-- Content -->
		</foundation-layout-item>
		<foundation-layout-item title="Component 3">
			<!-- Content -->
		</foundation-layout-item>
</foundation-layout>

This is because you cannot have multiple layout elements as the immediate child of the layout root. You will get a runtime error.

Multiple nested layouts

The following example is invalid:

<foundation-layout>
		<foundation-layout-item title="Component 1">
      <another-component></another-component>
		</foundation-layout-item>
		<foundation-layout-item title="Component 2">
			<!-- Content -->
		</foundation-layout-item>
</foundation-layout>

Where the markup of another-component is something like:

<!--other markup-->
<foundation-layout>
		<foundation-layout-item title="Component 1">
			<!-- Content -->
		</foundation-layout-item>
		<foundation-layout-item title="Component 2">
			<!-- Content -->
		</foundation-layout-item>
		<foundation-layout-item title="Component 3">
			<!-- Content -->
		</foundation-layout-item>
</foundation-layout>
<!--other markup-->

This is because you cannot have an instance of the layout nested inside of another layout instance. You could try adding multiple items at once using .addItem([elem1,..,elemN]) instead.

Nested item

The following example is invalid:

<foundation-layout>
		<foundation-layout-item title="Component 1">
			<foundation-layout-item title="Component 2">
				<!-- Content -->
			</foundation-layout-item>
			<foundation-layout-item title="Component 3">
				<!-- Content -->
			</foundation-layout-item>
		</foundation-layout-item>
</foundation-layout>

This is because you cannot have <foundation-layout-item> inside other <foundation-layout-item>. You will get a runtime error.

Observables with directives

The following is invalid:

@customElement({
	name: 'my-element',
	template,
})
class Analytics extends GenesisElement {
	@observable showIndexFunds = true;

	toggleShowIndexFunds() {
		this.showIndexFunds = !this.showIndexFunds;
	}
}

var template = html<Analytics>`
	<button
		class="toggle"
		@click=${x => x.toggleShowIndexFunds()}
	>Toggle Index</button>
	<foundation-layout>
		<foundation-layout-region>
			<foundation-layout-item>
				<chart type="stocks"></chart>
			</foundation-layout-item>

			${when(x => x.showIndexFunds, html`
				<foundation-layout-item>
					<chart type="index-funds"></chart>
				</foundation-layout-item>
			`)}

		</foundation-layout-region>
	</foundation-layout>
`;

Initially, you will see both items correctly rendered like this:

+---------------------------------------------+
|              Stocks Chart                   |
+---------------------------------------------+
|              Index  Chart                   |
+---------------------------------------------+

But as the user clicks the toggle button, the Index Chart will not be taken away and added back in. Instead, it will be added as a duplicate every time the observable is set true. Additionally, the contents of the panel will be wiped as duplicates are added.

To work around this, you would use directives inside custom web components inside the layout.

Binding events inline in the declarative API

The following example is invalid:

<foundation-layout>
		<foundation-layout-item>
			<input type="checkbox" @change=${(x,c) => x.doSomething()} />
		</foundation-layout-item>
</foundation-layout>

Because of a limitation in the cloneNode() API, event listeners are not copied. This process is part of the process of adding an item to the layout, using both the declarative HTML and JavaScript APIs. So while you will see a checkbox on the screen as part of the layout, the event listener will not fire when you change the checkbox. This applies to all items and events.

The idiomatic way of implementing this event binding is to create a custom element and attach the event internally.

// template
export const exampleComponentTemplate = html<ExampleComponent>`
  <template>
    <input type="checkbox" ${ref('checkbox')} @change=${(x, c) => x.doSomething()} />
  </template>
`;

// model
@customElement({
  name: 'example-component',
  template: exampleComponentTemplate,
})
export class ExampleComponent extends GenesisElement {
  checkbox: Checkbox;
	doSomething() { } // do something important
}

You can then use the custom component in the layout:

<foundation-layout>
		<foundation-layout-item>
			<example-component><example-component/>
		</foundation-layout-item>
</foundation-layout>

See here for a thorough technical explanation.

New layout item not displaying

Say you have the following layout, the simple example, with autosave enabled.

<foundation-layout auto-save-key="simple-example">
  <foundation-layout-region type="horizontal">
    <foundation-layout-item title="Component 1">
      <!-- Content -->
    </foundation-layout-item>
    <foundation-layout-item title="Component 2">
      <!-- Content -->
    </foundation-layout-item>
  </foundation-layout-region>
</foundation-layout>

The user of your layout will move things around and this will cache the layout. Say you then update the layout to add an item.

<foundation-layout auto-save-key="simple-example">
  <foundation-layout-region type="horizontal">
    <foundation-layout-item title="Component 1">
      <!-- Content -->
    </foundation-layout-item>
    <foundation-layout-item title="Component 2">
      <!-- Content -->
    </foundation-layout-item>
    <foundation-layout-item title="Component 3">
      <!-- Content -->
    </foundation-layout-item>
  </foundation-layout-region>
</foundation-layout>

You and the user will still only see the first two items. This is because the cached layout is being loaded, which does not contain the new item. To fix this, you must invalidate the cache.

Resource-intensive component resetting in layout

Say you have a component which has to initialise a resource-heavy or long-awaited asynchronous task, such as the following:

@customElement({
  name: 'mock-connected',
})
export class MockConnected extends GenesisElement {
  @observable resource = '';

  async connectedCallback(): Promise<void> {
    super.connectedCallback();
    // Simulate doing some work with an external service
  }

  async disconnectedCallback(): Promise<void> {
    super.disconnectedCallback();
    // Simulate cleaning an external service
  }
}

As explained in the lifecycle info section, this component may have its disconnectedCallback and connectedCallback lifecycle at unnecessary times, effectively wasting time re-initialising a potentially heavy resource.

Use LifecycleMixin to access properties on the class, which can be used to run lifecycle functionality more thoughtfully. In the following example, the resource-intensive tasks are called conditionally - only when needed.

@customElement({
  name: 'mock-connected',
})
export class MockConnected extends LifecycleMixin(GenesisElement) {
  @observable resource = '';

  async connectedCallback(): Promise<void> {
    super.connectedCallback();
    const shouldRunConnect = this.shouldRunConnect;
    DOM.queueUpdate(async () => {
      if (!shouldRunConnect) return;
      await this.init();
    });
  }

  async disconnectedCallback(): Promise<void> {
    super.disconnectedCallback();
    const shouldRunDisconnect = this.shouldRunDisconnect;
    DOM.queueUpdate(async () => {
      if (!shouldRunDisconnect) return;
      await this.deInit();
    });
  }

  // Simulate doing work with an external service
  async init(): Promise<void> { }

  // Simulate cleaning an external service
  async deInit(): Promise<void> { }
}

The above is quite a comprehensive example, but it doesn't necessarily have to be so complicated. You might just want to exit early from the connected callback without using the DOM.queueUpdate functionality. However, it is useful for handling the async setup process properly.

warning

It is important to capture the parameter in the example above (e.g. const shouldRunDisconnect = shouldRunDisconnect) so that the information is cached at the time of the lifecycle change, for use when the DOM.queueUpdate work is performed. This is not required if you run your lifecycle methods synchronously; however, if you follow the pattern above, you need to schedule the async functionality to run after the layout considers the relevant lifecycle-gating functionality (such as dragging) to be complete.

Consuming lifecycle value multiple times

Consider the following example, where multiple bits of functionality are being gated with shouldRunConnect:

@customElement({
  name: 'mock-connected',
})
export class MockConnected extends LifecycleMixin(GenesisElement) {
  @observable resource = '';

  async connectedCallback(): Promise<void> {
    super.connectedCallback();
    console.log("shouldRunConnect: " + this.shouldRunConnect)
    if (this.shouldRunConnect) {
      await this.init();
    }
    await otherSetup(this.shouldRunConnect);
  }

  // Simulate doing work with an external service
  async init(): Promise<void> { }
  async otherSetup(connectToResource: boolean): Promise<void> {}
  // Similar setup in disconnectedCallback...
}

In this example, when you have this item inside the layout, the functionality will not correctly be gated when you add or remove other items as intended.

This is because shouldRunConnect (and shouldRunDisconnect) perform a check to see whether the layout has performed an event that should gate functionality; reading the value multiple times will incorrectly signal that there hasn't been another lifecycle event upon subsequent reads during the same cycle. The mental model you can use here is thinking of consuming the check when you read the variable.

Therefore, if you want to use the value multiple times in the connectedCallback and disconnectedCallback functions, you should cache the variable.

** You should only read the variables this.shouldRunConnect and this.shouldRunDisconnect once per shouldRunConnect and shouldRunDisconnect cycle respectively. **

  async connectedCallback(): Promise<void> {
    super.connectedCallback();
    if (this.shouldRunConnect) {
      console.log("shouldRunConnect: " + this.shouldRunConnect)
      await this.init();
      await otherSetup(true);
    } else {
      await otherSetup(false);
    }
  }
  // or....
  async connectedCallback(): Promise<void> {
    super.connectedCallback();
    const runFullConnect = this.shouldRunConnect;
    console.log("shouldRunConnect: " + runFullConnect)
    if (runFullConnect) {
      await this.init();
    }
    await otherSetup(runFullConnect);
  }

danger

The same limitation applies if you're checking the variable multiple times because you have a hierarchy of extending classes. Again, you should cache the variable for checking in this case.

Supplementary information

Custom components to handle bindings and event listeners

As shown in this example, you need to wrap html that uses fast bindings and event listeners into their own custom components. This section is a technical explanation for why this is necessary. It is required that we make use of cloneNode to allow the layout to add multiple instances of a registered component.

Consider the following, which is the order of events for loading the layout when using html that includes bindings.

As the DOM is parsed, the elements inside the layout are created. At this point, the bindings are attached and the event listeners are created, and the connectedCallback lifecycle method executes.
Once all the elements contained in the layout have been created, the layout itself initialises*.
As part of the initialisation process, it moves the element from the DOM and puts it internally into a document fragment as part of the layout registration cache.
We then load golden layout with the layout config and the registered items, where the registered items create a clone of the items in the document fragment.

The issue occurs during step four - the clone from cloneNode doesn't have the event listeners, so the new copy (which is the one you see on the layout) has no event listeners. Compare this with the similar but different process if you've wrapped up the html into its own custom component.

As the DOM is parsed, the elements inside the layout are created. At this point, the bindings are attached and the event listeners are created, and the connectedCallback lifecycle method executes.
Once all the elements contained in the layout have been created, the layout itself initialises*.
As part of the initialisation process, it moves the element from the DOM and puts it internally into a document fragment as part of the layout registration cache. This is just a tag, such as <filtered-chart></filtered-chart>, not a definition that includes bindings or event listeners.
We then load golden layout with the layout config and the registered items, where the registered items create a clone of the items in the document fragment.
When that clone is put on the DOM, it is a custom element. And so it calls the lifecycle method again connectedCallback as well as other initialisation methods that include attaching the event listener to the component as required.

* It initialises after the timeout specified by the reload-buffer attribute if using the declarative HTML API, or if steps 3 and 4 occur during calls to registerItem and addItem respectively.

License

Note: this project provides front-end dependencies and uses licensed components listed in the next section; thus, licenses for those components are required during development. Contact Genesis Global for more details.

Licensed components

Genesis low-code platform

Declarative HTML API​

Set-up​

Basic install​

Custom styling​

<foundation-layout-region type="vertical">​

<foundation-layout-region type="horizontal">​

<foundation-layout-region type="tabs">​

Sizing​

JavaScript API​

Dynamic registration and adding items​

Serialising layout​

Events​

Customising header buttons​

Applying the custom button​

Renaming example​

Autosaving layout​

Reloading the layout​

Layout placeholder​

Invalidating the cache​

Contained elements​

Element lifecycle (gating)​

Resource-intensive components​

Managing the state​

Element cloning​

Examples​

Simple example​

Nested example​

Multi-nested example​

repeat directive​

when directive​

Multiple instances​

Adding items dynamically​

Contained example​

Loading serialised layouts​

Proactively registering items​

Reactively registering items​

Custom item renaming header button​

Incorrect examples​

Non-layout child​

Layout region in tabs​

Multiple items in root​

Multiple nested layouts​

Nested item​

Observables with directives​

Binding events inline in the declarative API​

New layout item not displaying​

Resource-intensive component resetting in layout​

Consuming lifecycle value multiple times​

Supplementary information​

Custom components to handle bindings and event listeners​

License​

Licensed components​

Declarative HTML API

Set-up

Basic install

Custom styling

`<foundation-layout-region type="vertical">`

`<foundation-layout-region type="horizontal">`

`<foundation-layout-region type="tabs">`

Sizing

JavaScript API

Dynamic registration and adding items

Serialising layout

Events

Customising header buttons

Applying the custom button

Renaming example

Autosaving layout

Reloading the layout

Layout placeholder

Invalidating the cache

Contained elements

Element lifecycle (gating)

Resource-intensive components

Managing the state

Element cloning

Examples

Simple example

Nested example

Multi-nested example

`repeat` directive

`when` directive

Multiple instances

Adding items dynamically

Contained example

Loading serialised layouts

Proactively registering items

Reactively registering items

Custom item renaming header button

Incorrect examples

Non-layout child

Layout region in tabs

Multiple items in root

Multiple nested layouts

Nested item

Observables with directives

Binding events inline in the declarative API

New layout item not displaying

Resource-intensive component resetting in layout

Consuming lifecycle value multiple times

Supplementary information

Custom components to handle bindings and event listeners

License

Licensed components